Tuesday, March 30, 2021

THE FIRST CONTROL OF THE BEES OF EXPERIMENTAL APIARY IN 2021

 

E1- Normal working state. There is excitement and a small emergency heating (seen in the diagram) which tell us about the need of the fast recovery of the temperature. This can be a sign of brood presence. Small intervals of brood heating. It is possible that brood rearing has begun in this family. Almost a frame of honey remained in the family. The extra food was hardly touched.


E2 - Normal working state. There are no signs of brood rearing. There was some honey in one frame. About 1/3 of the box of extra food  was taken.


K1 - Normal working state. A little excitement. There are no signs of brood rearing. The family is slightly larger than the previous ones. There is no honey in the frames. Fully eaten extra feed - 1 box.





Friday, March 12, 2021

DETERMINATION OF THE BEGINNING AND OF THE PEAK OF REPRODUCTIVE FLASH OF VARROA MITES ON THE BASIS OF THE MITES DROP.

It is possible that we will repeat ourselves a little and once again talk about the features of the study of free fall of the mites on sticky board, but this is extremely important. It is important because if you know and understand all this, then one glance at the debris on the sticky board will be enough for you to determine the degree of infection and the danger level of the state of your bees. So, on the basis of data obtained by us over several years of experiments, we can assert that the mites drop in the hive is heterogeneous. It consists of two main groups of individuals.

 The first group consists of young underdeveloped or unfertilized females that did not take part in the increase in the parasite population. The second group consists of dark-burgundy old females that have participated in several breeding cycles and have already outlived their term. Among them there are also two subgroups of individuals, the presence of which can give us information about the events taking place in the hive.

 Usually we are accustomed to notice and to count the mites of the second group in the mites drop. Its first subgroup is the old maroon females, which  can be seen lying more or less evenly over the entire surface of the sticky board. They die while feeding on the bees, and fall down, most likely due to death from age. Sometimes there are live mites among them, which for some reason fall down and die already on the board from hunger. What all these mites have in common is that they fall from worker bees, on which they have been parasitized between reproduction cycles.

 Parasites can fall both in the presence of the process of reproduction of new generations of mites in the brood of bees, and in the complete absence of brood. Basically,  this type of the mites drop simply show the presence of parasites as such and, to a greater or lesser extent, indicate their number. But this information is unreliable, since there may be periods when only young and strong Varroa females remain in the bee family and they are not going to die. The absence of the mites on sticky board at such moments cannot indicate the absence of parasites in the bee colony. This usually happens in May – June, when the overwintered females gradually die off, and in the bee family remain only mature juvenile females of Varroa mites. That is why we do not want and do not recommend using a specific number of the mites falling down on sticky board to predict specific values ​​of Varroa mites population in a bee colony.

 The second subgroup is old mature females that die during the reproduction process. We believe that reproduction is the most costly process in terms of forces, which stimulates the death of old females at the end of the egg-laying process. Their death occurs in sealed cells, in which dead immature or infertile young females also remain. All these individuals are thrown down by the bees when cleaning the cells, after the release of young bees. Such kind of the mites drop appears synchronously with the emergence of young bees from the brood and that is why all these dead mites lie between the frames with the brood. This is a specific sign of the mites drop of the second subgroup.

 What can all this say to the beekeeper?

The uniform fall of old maroon females on sticky board in all parts of the hive, or the fall of the mites of the first subgroup of the second group, speaks primarily of the presence of Varroa mites in the bee family as such. And their number speak about the infestation of  the bee family very conditionally.

 The appearance in the mites drop of the mites of the first group, that is - deutonymphs, young immature females, young infertile females, from almost transparent to bright red, marks a new stage in the development of Varroa mites population. We believe that they end up at the bottom of the hive due to unsuccessful conditions for their development: most likely, due to inappropriate thermal conditions in the brood, which is very far from the center of the nest. And this means that the mites have already occupied the entire centre of the brood part of the nest and came out to its periphery.

 As a rule, the fall of this type of the mites indicates a sharp increase in the parasites population, which takes up a lot of space in the nest and goes to its borders, where it is colder and conditions for the development of young female mites are worse. An increase in this particular type of mites in the total  mites drop with a small number of old dark mites indicates an upcoming powerful surge in the growth of the mites population in the bee colony, or the very beginning of this growth. It is from this moment beekeeper have to take emergency measures must be taken for their neutralization.

  As a rule, an increase in the mites drop of such type of mites precedes an increase in the fall of old maroon mites by 15–20 days. This is a very good indicator for predicting an increase in the number of mites and the imminent appearance of an emergency situation in the bee colony! This is especially important for those, who do not use chemical preparations for mass and repeated treatment of their bees.


On the picture you can see the graph of a separate count of two types of mites for five bee colonies over a year and a half. But the most indicative are two graphs - the graph for the E-1 family and for the 8-1 family. Let's consider the E-1 schedule. It is clearly seen that in the interval 13-14 (April) the growth of free fall of mature mites is not observed, while the increment of free fall of an immature mites warns about the beginning of the mites population growth, which occurs in the interval 14-15 (May) and especially in the interval 15-16 ... (June) This bee family did not survive after point 16. The infestation level  became fatal for it.  Schedule for family 8-1 is flatter. The initial infestation level of this family was lower. But on the interval 13-16 (April-June), it shows the same tendency as the E-1 family - the growth of free fall of an immature mites outstrips the growth of free fall of a mature mites and predicts a significant increase of Varroa mites population. The trend was interrupted by the removal of drone brood, but as can be seen from the graphs, this only delayed the explosive growth of the mites population in this family until the end of  honey harvest. This pattern is typical for the spring development of the mites in a bee colony.

The appearance in the mites drop in a sufficiently large number of old maroon mites of the second subgroup of the second group under the frames with brood mixed with young immature mites of the first group, indicates the development and deterioration of the situation with the quantity of Varroa mites in the family of bees.

 If the appearance of young immature mites indicates the beginning of the growth of the mites population, then the appearance of this mixture of mites of different ages under the brood frames indicates a peak in the reproductive activity of Varroa mites. Measures must be taken immediately. The population of mites could already reach enormous sizes. So the most radical and urgent measures need to be taken.

So, for a practicing beekeeper, this means that if in the spring, pale-colored and/or translucent mites appeared in free fall on sticky board, then urgent measures must be taken to combat Varroa mites. This is a sign, that after 2-3 weeks, the growth of Varroa mites population will become fatal for the family in the absence of measures to combat it. It doesn't matter how many mites you will see on sticky board. The less the better ... As long as there are no pale mites in free fall, you can still calmly do your job. But when they appear, the fight against the mites must be started urgently! Otherwise, the bee family will die.

 The same situation is possible after honey collection. But at this time, it is warm enough and the death of young and immature mites decreases. Therefore, the growth of free fall of the mites can proceed in parallel in groups of mature and immature mites in any quantity. But despite this seasonal difference, the appearance and growth of free fall of immature mites suggests that the beekeeper  needs to take action urgently.

 We assume, that the adoption of measures -  is primarily the selection of all brood,  sealed and open, from the families which should work on honey collection into one family (or several families, depending on the size of the apiary), followed by treatment of only this family with formic or oxalic acid. This will drastically reduce the quantity of Varroa mites in working families and will leave them free from chemicals and acaricides, with which are usually treated all families of the apiary, and which strongly worsening the condition of bees, (and sometimes killing them) and which are making honey unsuitable for export.

 Thus, the control of the appearance and growth of free fall of pale immature or infertile mites - is an excellent indicator of the moment when anti-varroa measures become vital to maintain the strength and vitality of bee colonies. And while it is not too late, beekeeper can use environmentally friendly methods of dealing with Varroa mites, and that is not unimportant !

 

Copyright   Sergey Glebskij   2021   ©  All rights reserved

Thursday, March 4, 2021

NEW MODEL OF OBSERVATIONAL BEEHIVE DESIGNED BY APIVOX PROJECT TEAM.

For the use in our experimental apiary, we have developed an observational hive that allows us to carry out experiments on control of parameters of vital activity of the bees using small families.


Unlike older models, this hive is completely demountable like all standard models of the hives. This became possible due to the use of a rather expensive material - synthetic glass 4mm thick. The rest of the material is a pine scantling. The weight of the hive is about 4 kg.

The new hive of the Apivox project, as well as all other hives of our project, has a hygienic bottom with a net and a sticky board for counting the number of Varroa mites falling down from the bees during the life of bee family and development of the mites population. The bottom is detachable and replaceable.


A separate window in the side wall allows you to remove the sticky board without disturbing the bees and to count mites and to clean the board. To do this, you do not need to remove the main shields that cover the hive body from light. All removable elements of the hive are attached with niodimum magnets. This allows them to be removed and replaced quickly and without special tools. The porch is closed by a door, which allows transporting bees or simply limiting their flight.




The hive body has a standard size for 1 frame of any type - Dadan or Ruth or Langstrott.  There are 4 barred ventilation holes in the body-box, allowing you to easily transport or carry bees in this hive or to restrict their flight for a long time. The frame is inserted into the body from above. The body is placed on the bottom and fixed with special eccentric ties.


In standard version, the hive has 1 body. If desired, the hive can be completed with an additional body-box and / or a honey super.

 Inner cover and the roof are assembled into a single structure giving the hive additional rigidity.  There are barred openings in inner cover, which together with opened upper plug provide additional ventilation during transportation.



But the main purpose of these holes and the upper plug in the roof is to provide easy access for acoustic control of the family. In fact, this is a hole for a smartphone on which the Apivox Smart Monitor application is installed, which allows you to monitor the state of bees without opening the hive.

 




This construction is also equipped with eccentric ties, which allows the entire observation hive to be held together into a single rigid structure. There is a handle on the roof, for which the observation hive is easy to carry. Naturally, all transparent elements of the hive are covered with shields made of painted hardboard with a thickness of 3 mm. which, together with plexiglass, gives a wall thickness of about 8 mm. which is quite enough for summer time.

 In winter, the hive can be additionally insulated with sheets of foamed polyethylene. During winter of 20-21, packeges of the bees  purchased by us for the experimental apiary overwintered in such boxes. The wintering was successful. All the bees survived the winter.

This type of hive will be produced in limited quantities for our experimental apiary, for beekeeping courses, for acoustic control courses, for amateur beekeepers, as well as in a simplified version for queens rearing farms. The use of such a hive in scientific and educational processes will improve the visibility of the operations performed to control Varroa mites and during the usage of the method of acoustic control, and will also allow, like all previous models, to observe the life of bees.

 For queen breeders, such a simple one-frame hive will exclude additional difficulties with the maintenance of small-sized hives and their special frames used for mating of young queens. The transparent walls of the hive will allow you to quickly monitor the state of the queen and the beginning of oviposition. This design of the hive can be ordered not with the full-sise frame, but with a  half-frame, which will make the hive even cheaper.

 


Estimated price of a  observational hive with one body-box:

Ø      In the educational version - it will be for the USA with delivery - $ 150,

Ø      The variant for queen breeders (full frame, without glass) -  For the USA with delivery - $ 60.

Ø      The variant for queen breeders (full frame, with thin glass) - For the USA with delivery - $ 80.

Ø      The variant for queen breeders (half-frame, without glass) - For the USA with delivery - $ 50

Ø      The variant for queen breeders (half-frame, with thin glass) - For the USA with delivery - $ 65

 For other countries we can calculate the price and delivery price on request.

You can additionally order elements to the standard version with artificial glass 4 mm thick. :

Ø      Separate bottom

Ø      Separate body-box for Dadant frame

Ø      Separate body-box  for half-frame

Ø      Separate body-box  for Ruth frame

Ø      Separate body-box  for Langstrott frame

 

If you want to order Apivx Observational Beehive, please contact us using email      glebskij@gmail.com